Download Print this page

Frymaster 14 Series Operator's Manual page 25

Frymaster electric fryer operator's manual

Advertisement

4.7
M2007 Button Description and Functions
4.7.1 Navigation Buttons
The menu on the M2007 uses
navigate the various menus and submenus (see Figure 1).
When programming, the left screen shows a menu or
submenu item. The right screen is for data entry. Data is
entered with alpha-numeric characters, scrolling through
lists or by toggling between choices (see Figure 2).
During programming if a button is not pushed within one minute, the computer returns to operation
mode.
4.7.2 Filter, Temperature and Info Buttons
< FLTR
FLTR >
The
and
vat fryer on demand, while the right
FLTR
buttons, if pressed once will display the amount of cook cycles remaining until a filtration
FLTR
prompt. When the
TEMP
displayed.
The
temperature on both sides. If the
setpoint temperatures of the vats. If the fryer is off, the display shows the current versions of
INFO
software.
The
recovery time for each vat from the last test. Recovery displays the time required for the fryer to
raise the temperature of the oil 50°F (28°C) between 250°F (121°C) and 300°F (149°C). Maximum
recovery time should not exceed 1:40 for electric or 2:25 for gas. If the
held for three seconds it shows information such as usage, filter statistics and last cook cycles (see
page 4-38 for more details on the
4.7.3 Cook Cycle and Selection Buttons
The
buttons are dual-function buttons shared with
1
2
the number
and
below the LED displays (see Figure 3). Use these buttons
to select or cancel functions. The
out of and quit submenus.
34
tu
and
buttons (see Figure 1) are used to filter the left and right vats of a split
FLTR >
button is pressed twice, the date and time of the last filter will be
button, if pressed once while the fryer is on, displays current vat
TEMP
button is pressed twice while the fryer is on, it shows the
button (see Figure 1), if pressed once when the fryer is on, shows the
INFO
button).
buttons. They are located directly
button is used to back
buttons to
Left Display
button is used to filter a full vat on demand. The
4-7
Figure 1
Right Display
Figure 2
INFO
button is pressed and
Figure 3

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Biela14 series