Bead-Carry-Out (BCO)
Problem
Bead-Carry-Out (BCO) is
happening.
NOTE:
•
If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
Action
If the printer is installed in a high altitude location, set the altitude of
the location.
1
Launch the Printer Setting Utility, and click Adjust Altitude on the
Printer Maintenance tab.
2
Select the value close to the altitude of the location where the
printer is installed.
3
Click the Apply New Settings button.
Troubleshooting
206