Color Registration Is Out Of Alignment - Xerox DocuPrint CM205 b User Manual

Xerox printers user guide
Table of Contents

Advertisement

 Color Registration Is out of Alignment
Problem
Color registration is out of
alignment.
NOTE:
If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
Action
Execute auto color registration adjustment.
1
Launch the Printer Setting Utility, and click Registration
Adjustment on the Printer Maintenance tab.
2
Deselect the check box next to On.
3
Click the Start button next to Auto Correct.
Clean the CTD sensor.
1
Clean the CTD sensor.
2
Launch the Printer Setting Utility, and click Registration
Adjustment on the Printer Maintenance tab.
3
Deselect the check box next to On.
4
Click the Start button next to Auto Correct.
See also:
• "Cleaning the Color Toner Density (CTD) Sensor" on page 240
Print the color registration chart and manually correct the color
registration.
1
Launch the Printer Setting Utility, and click Registration
Adjustment on the Printer Maintenance tab.
2
Deselect the check box next to On.
3
Click the Start button next to Print Color Regi Chart.
The color registration chart is printed.
4
Check the values with the straight lines on the chart.
5
Select the value for each color on the Printer Setting Utility.
6
Click the Apply New Settings button.
7
Click the Start button next to Print Color Regi Chart to print the
color registration chart again.
8
Adjust till all straight lines are at the value of 0.
See also:
• "Adjusting Color Registration" on page 213
Troubleshooting
210

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents