Mm / Inch; Low Toner Alert Msg - Xerox DocuPrint CM205 b User Manual

Xerox printers user guide
Table of Contents

Advertisement

Panel Alert Tone
Auto Clear Alert
Job Tone
Alert Tone
Out of Paper
All Tones

• mm / inch

Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)*
Inches (")

• Low Toner Alert Msg

Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
On*
155
Using the Operator Panel Menus and Keypad
Off*
Does not emit a tone when the operator panel input is
incorrect.
Min
Emits a tone at the specified volume when the operator panel
input is incorrect.
Middle
Max
Off*
Does not emit a tone before the printer performs auto clear.
Min
Emits a tone at the specified volume five seconds before the
printer performs auto clear.
Middle
Max
Off
Does not emit a tone when a job is complete.
Min
Emits a tone at the specified volume when a job is complete.
Middle*
Max
Off
Does not emit a tone when a problem occurs.
Min
Emits a tone at the specified volume when a problem occurs.
Middle*
Max
Off
Does not emit a tone when the printer runs out of paper.
Min
Emits a tone at the specified volume when the printer runs out
of paper.
Middle*
Max
Off
Disables all the alert tones.
Min
Sets the volume of all the alert tones at once.
Middle
Max
Specifies the default measurement unit.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents