Enabling the Panel Lock
1
Press the
(System) button.
2
Select Admin Menu, and then press the
3
Select Secure Settings, and then press the
4
Select Panel Lock, and then press the
5
Select Panel Lock Set, and then press the
6
Select Enable, and then press the
7
As necessary, select Change Password, and change the password using the numeric keypad.
Then, press the
NOTE:
•
The factory-default panel password is 0000.
NOTE:
•
The procedure described below allows you to reset the password.
1
Turn off the printer. Then, while holding the
•
If you change the password while Panel Lock Set is Enable, perform steps 1 to 2. Enter the current
password, and then press the
the
button. Enter the new password, and then press the
button.
button.
button. Perform steps 3 to 4. Select Change Password, and then press
Using the Operator Panel Menus and Keypad
button.
button.
button.
button.
(System) button, turn on the printer.
button. This will change the password.
174