NOTE:
•
Depending on the size of print media, first slide the slide bar backward until it stops, and then pinch the
length guide and slide it backward until it touches print media.
10
Insert the PSI into the printer and then align the PSI to the marking on the MPF.
11
Select the paper type from the print driver if the loaded print media is not standard plain paper. If
a user-specified print media is loaded in the MPF, you must specify the paper size setting by
using the print driver.
NOTE:
•
For more information about setting the paper size and type on the print driver, refer to the online Help
provided for the print driver.
NOTE:
•
For standard-size paper, adjust the guides first and then set paper.
77
Printing Basics