Replacing the Toner Cartridge
Important
• When replacing the toner cartridge, switch the printer on.
• Remove any print jobs from the center output tray and close the bypass tray cover before following the
next steps.
1.
Press the <Menu> button to display the Menu screen.
2.
Press the < > or < > button until [Replace Toner] is displayed, then press the < >
or <Eject/Set> button.
3.
Press the < > or < > button until the toner color you want to replace is displayed,
then press the < > or <Eject/Set> button.
The toner cartridge carrier rotates and stops when the specified toner comes forward.
4.
Make sure that "Ready to replace" is
displayed on the control panel, and open
the front cover.
Important
• Do not touch any parts inside the printer.
5.
Push the lever on the right side of the toner
cartridge into the printer to align the
mark on the lever to the
6.
Pull the toner cartridge out slowly.
Note
• To prevent the toner from dirtying the floor, lay a piece
of paper on the floor first before putting the toner
cartridge down.
62
6 Daily Care
mark on the printer.
mark next to the