Displaying Optional Accessory Configuration And Paper Tray Settings - Xerox DocuPrint C525 A User Manual

1.5 Displaying Optional Accessory
Configuration and Paper Tray Settings
You can display on the print driver, the optional accessory configuration or settings
configured at the control panel such as paper type or size. These settings are displayed on
the [Options] tab. This section explains the procedure using Windows XP as an example.
Important
• For paper size and paper type settings, you must configure them at the control panel beforehand.
Note
• For Windows 2000/Windows XP, only users with administrator's rights can change the settings. Users
without the rights can only check the contents.
• The applicable items on the print driver can be set to manual operation.
1. From the [Start] menu, click [Printers and Faxes] and then display the properties of the
printer to be used.
2. Click the [Options] tab.
3. Click [Get Information from Printer].
The data of the printer can be displayed on the print driver.
4. Click [OK].
The contents of the [Options] tab will be updated based on the data obtained from the
printer.
Note
• The paper types and sizes set on the control panel will be displayed as [Paper Tray Information].

1.5 Displaying Optional Accessory Configuration and Paper Tray Settings

3
4
19