Checking The Status Of Crus; Replacing The Toner Cartridge - Xerox D125 User Manual

Checking the status of CRUs

Check the status of consumables by using the Supplies tab.
The status of consumables is indicated by Ready, Order New, Replace Now, or other
indications.
An indication from 0 to 100% displays the remaining amount of toner.
The machine UI will indicate when it is time to order and/or install a Customer
Replaceable Unit (CRU). With some CRUs, the UI indicates that the machine may
continue to run copy or print jobs without immediately replacing the CRU. When it is
time to replace it, a message appears on the UI, and the machine stops running.
Always recycle/dispose the used CRU according to the disposal instructions supplied
with the new CRU.
Note
If image quality (IQ) issues are on the output, refer to the problem solving chapter of
the user guide for specific IQ problems and their related corrective actions.

Replacing the toner cartridge

Warning
Replace a toner cartridge while the machine is ON. Before replacing a cartridge, ensure
that the machine is given time to cool down. Failure to do so may result in burns to the
skin if certain parts of the machine are touched.
1. Open the left cover of the machine.
2. Lay paper on the floor before removing the cartridge. This will allow any excess toner
to fall on the paper.
®
Xerox D110/D125/D136 Printer
User Guide
Maintenance
9-9