Using The Extension Output Tray; Setting The Paper Sizes And Types - Xerox DocuPrint C525 A User Manual

Using the Extension Output Tray

The extension output tray is designed to prevent paper from falling from the printer after the
print job is complete.
Before printing a document, pull out the extension output tray.
If the extension output tray is still not long enough for the paper you are loading, pull the
extension output tray further.
3.3

Setting the Paper Sizes and Types

You can set the paper size and type that is loaded in the bypass tray on the control panel
when the [Bypass Mode] on the [Tray Settings] menu is set to [Panel Specified] on the
control panel.
In this case, the printing is done only when the paper size and type settings on the control
panel are the same as on the print driver.
Also, using the [Display Popup], you can specify whether or not to display the screen to set
the paper size and type every time you load paper into each tray on the control panel. The
default settings do not display the message for the bypass tray and do display the message
for the paper trays (optional).
Note
• The [Display Popup] setting for the bypass tray is available only when [Bypass Mode] is set to [Panel
Specified].
3.3 Setting the Paper Sizes and Types
33