Replacing A Toner Cartridge - Xerox Phaser 6120 Replacement Manual

Replacing a Toner Cartridge

Note:
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If
TONER OUT ACTION
is set to
STOP
the color of the toner) appears when a toner cartridge becomes empty. Follow
the steps below to replace the toner cartridge.
If
TONER OUT ACTION
menu is set to
1 Check the message window to see which color of toner is empty.
Perform the operation described below to automatically rotate the
carousel to move the toner cartridge for the specified color, so that it can
be replaced.
Press Key
× 2 (or × 3)
Press until appropriate
color (
Replacing Consumables
on the
, the message
CONTINUE
) is displayed.
X
QUALITY/TONER OUT ACTION
REPLACE X TONER
on the
QUALITY/TONER OUT ACTION
, the message
Until Display Reads
REPLACE X TONER or X EMPTY
MENU
PRINTABLE PAGES MENU
If the hard disk drive is installed, the
PROOF/PRINT MENU
MENU
QUALITY MENU
TONER REMOVAL
BLACK
X
(where " " represents
X
appears.
X EMPTY
appears.
menu
79