Near the Fuser Unit
1.
Open the cover E (or the unit D when the
duplex unit is installed), and then open the
cover F.
Important
• The fuser unit, and the surrounding area are hot. You
may get burnt if you touch it directly.
2.
Open the cover A (when the duplex unit is
installed, skip this procedure).
3.
Push up the levers on both sides (green
colored parts) and remove any jammed
print media.
Important
• Never touch the outer levers located on both sides of
the fuser unit (gray colored part), which are used to
remove or install the fuser unit.
4.
Return the levers to their original positions, and then close all covers (including the
unit D when the duplex unit is installed).
5.1 When Paper Jams
47