Table of Contents
Advertisement
which do not function correctly.
If this does solve the problem you can use the DMZ function. This should
work with almost every application, but:
Printing
Problem 1:
When I tried to install the Printing software for Peer-to-Peer printing,
I received an error message and the installation was aborted. .
Solution 1:
This may be caused by an existing installation of the printer port software.
Before attempting another installation:
To remove an existing printer port installation:
1. Open Start - Settings - Control Panel - Add/Remove Programs
2. Look for an entry with a name like "Shared Port", "Shared Printer
3. Select this item, click "Add/Remove", and confirm the deletion.
Problem 2:
I am using Windows 95, and the Printing software installed and ran,
but when I selected a port on a Broadband Router and clicked "Add",
the printer was not installed.
Solution 2:
Try installing the printer using the standard Windows tools, as follows:
1. Start the Add Printer Wizard.
2. Select Network Printer when prompted "How is the printer attached to
3. When prompted for the Network Path or Queue, enter a dummy value
It is a security risk, since the firewall is disabled.
Only one (1) PC can use this feature.
Remove the existing installation
Restart your PC
Port", "Print Server Driver" or "Print Server Port".
your Computer?", and click Next.
such as \\123, as shown below. (Do NOT select Yes for "Do you print
for MS-DOS programs?")
Appendix A - Troubleshooting
87
Advertisement
Table of Contents
