Table of Contents
Advertisement
XRT-811 User's Manual
Define Firewall Rule
Clicking the "Add" button in the Firewall Rules screen will display a screen like the example
below.
Data - Define Firewall Rule Screen
Name
Type
Source IP
Figure 42: Define Firewall Rule
Enter a suitable name for this rule.
This determines the source and destination ports for traffic cov-
ered by this rule. Select the desired option.
These settings determine which traffic, based on their source IP
address, is covered by this rule.
Select the desired option:
Any - All traffic from the source port is covered by this rule.
Single address - Enter the required IP address in the "Start IP
address" field". You can ignore the "Subnet Mask" field.
Range address - If this option is selected, you must complete
both the "Start IP address" and "Finish IP address" fields.
You can ignore the "Subnet Mask" field.
Subnet address - If this option is selected, enter the required
mask in the "Subnet Mask" field.
64
Advertisement
Table of Contents
