Using Dhcp - Planet XRT-811 User Manual

Internet broadband router

Table of Contents

5. Ensure your TCP/IP settings are correct, as described below.

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default

Windows setting. Using this is recommended. By default, XRT-811 will act as a DHCP

Server.

Restart your PC to ensure it obtains an IP Address from XRT-811.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured, check with your network administrator before making the

following changes.

Enter XRT-811's IP address in the Default gateway field and click OK. (Your LAN admin-

istrator can advise you of the IP Address they assigned to XRT-811.)

If the DNS Server fields are empty, select Use the following DNS server addresses, and

enter the DNS address or addresses provided by your ISP, then click OK.

Figure 18: TCP/IP Properties (Win 2000)

PC Configuration

Table of Contents