Planet XRT-811 User Manual page 85

Data - Routing Screen
RIP
Enable RIP
Static Routing
Static Routing
Table Entries
Properties
Figure 51: Routing Screen
Check this to enable the RIP (Routing Information Protocol) feature
of XRT-811.
XRT-811 supports RIP 1 only.
This list shows all entries in the Routing Table.
The "Properties" area shows details of the selected item in the
list.
Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.
Destination Network - The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.
Network Mask - The Network Mask for the remote LAN seg-
ment. For class "C" networks, the default mask is 255.255.255.0
Gateway IP Address - The IP Address of the Gateway or Router
which XRT-811 must use to communicate with the destination
above. (NOT the router attached to the remote segment.)
Metric - The number of "hops" (routers) to pass through to reach
the remote LAN segment. The shortest path will be used. The de-
fault value is 1.
Other Features and Settings
81