Planet XRT-811 User Manual page 71

Internet broadband router
Table of Contents

Advertisement

Firewall Rules
VPN
Timezone
E-Mail Logs
Send E-mail alert
E-mail Logs
Send
E-mail Address
Subject
SMTP Server
Port No.
Syslog Server
Enable Syslog
Syslog Server
Include
If enabled, the log will details of packets blocked by user-defined
Firewall rules. Logging can be set for each rule individually. Only
rules which have logging enabled will be included.
If enabled, the VPN log will record incoming and outgoing VPN
connections.
Select the correct Timezone for your location. This is required for
the date/time shown on the logs to be correct.
If enabled, an E-mail will be sent immediately if a DoS (Denial of
Service) attack is detected. If enabled, the E-mail address
information must be provided.
You can choose to have the logs E-mailed to you, by enabling
either or both checkboxes. If enabled, the Log will send to the
specified E-mail address. The interval between E-mails is deter-
mined by the "Send" setting.
Select the desired option for sending the log by E-mail.
When log is full - The time is not fixed. The log will be sent
when the log is full, which will depend on the volume of traf-
fic.
Every day, Every Monday ... - The log is sent on the
interval specified.
If "Every day" is selected, the log is sent at the time
specified.
If the day is specified, the log is sent once per week, on
the specified day.
Select the time of day you wish the E-mail to be sent.
If the log is full before the time specified to send it, it
will be sent regardless of the day and time specified.
Enter the E-mail address the Log is to be sent to. The E-mail will
also show this address as the Sender's address.
Enter the text string to be shown in the "Subject" field for the E-
mail.
Enter the address or IP address of the SMTP (Simple Mail Trans-
port Protocol) Server you use for outgoing E-mail.
Enter the port number used to connect to the SMTP Server. The
default value is 25.
If enabled, log data will be sent to your Syslog Server.
Enter the IP address of your Syslog Server.
Select the logs you wish to be included.
Security Configuration
67

Advertisement

Table of Contents
loading

Table of Contents