Table of Contents
Advertisement
"Members" Button
Internet Access
Restrictions
Block by Schedule
Services
Buttons
Members
Save
Cancel
View Log
Clear Log
Click this button to add or remove members from the current
Group.
If the current group is "Default", then members can not be
added or deleted. This group contains PCs not allocated to any
other group.
To remove PCs from the Default Group, assign them to another
Group.
To assign PCs to the Default Group, delete them from the
Group they are currently in.
See the following section for details of the Group Members screen.
Select the desired options for the current group:
None - Nothing is blocked. Use this to create the least restric-
tive group.
Block all Internet access - All traffic via the WAN port is
blocked. Use this to create the most restrictive group.
Block selected Services - You can select which Services are to
block. Use this to gain fine control over the Internet access for
a group.
If Internet access is being blocked, you can choose to apply the
blocking only during scheduled times. (If access is not blocked, no
Scheduling is possible, and this setting has no effect.)
This lists all defined Services. Select the Services you wish to
block. To select multiple services, hold the CTRL key while select-
ing. (On the Macintosh, hold the SHIFT key rather than CTRL.)
Click this button to add or remove members from the current
Group.
If the current group is "Default", then members can not be added or
deleted. This group contains PCs not allocated to any other group.
See the following section for details of the Group Members screen.
Save the data on screen.
Reverse any changes made since the last "Save".
Click this to open a sub-window where you can view the "Access
Control" log. This log shows attempted Internet accesses which
have been blocked by the Access Control feature.
Click this to clear and restart the "Access Control" log, making new
entries easier to read.
Security Configuration
61
Advertisement
Table of Contents
