At+Gcap Request Complete Ta Capabilities List; At+Gmi Request Manufacturer Identification; At+Gmm Request Ta Model Identification - Siemens MC35 Command Set

AT Command Set

2.39 AT+GCAP Request complete TA capabilities list

Test command Response
OK
AT+GCAP=?
Parameter
Execute command Response
AT+GCAP TA reports a list of additional capabilities.
+GCAP: <name>
OK
Parameter
<name> e.g.: +CGSM,+FCLASS
Reference Note
V.25ter +CGSM: The response text shows which GSM commands of the ETSI standard
are supported.

2.40 AT+GMI Request manufacturer identification

Test command Response
OK
AT+GMI=?
Execute command Response
AT+GMI TA reports information to identify the manufacturer.
SIEMENS
OK
Reference Note
See also "AT+CGMI Request manufacturer identification", Chapter 4.12.
V.25ter

2.41 AT+GMM Request TA model identification

Test command Response
OK
AT+GMM=?
Execute command TA reports one or more lines of information text which permit the user to identify
the specific model of device.
AT+GMM
MC35
OK
Reference Note
V.25ter See also "AT+CGMM Request model identification", Chapter 4.13.
MC35_ATC_01_V05.00 Page 44 of 256 15.07.2002