Siemens MC35 Command Set page 11

AT Command Set
"AT Command Set" Version MC35-ATC_01_V03.02 => MC35-ATC_01_V04.00
Chapter Page
2.2 19
2.5 21
2.17 31
4.8 74
4.9 75
4.19 85
4.21 88
4.26 98
8.2 186f
8.3 188
8.19 205
8.39 225
9.1.4 234
9.2 - 9.3 246f - 248f AT+CCUG,
"AT Command Set" Version MC35-ATC_01_V02.00 => MC35_ATC_01_V03.02
Chapter Page
1.4.2 16
4.5 69
4.6 70
4.11 78
4.21 88
4.35.1 114
4.46 130
5.11 152
6.1.8 173
8.2 186f
MC35_ATC_01_V05.00
AT command What is new
+++ Chapter revised.
ATD Parameters "G" and "g" for Closed User Group added.
ATO Chapter revised.
AT+CCUG New AT command: Closed User Group.
AT+CCWA New AT command: Call Waiting.
AT+CIND New AT command: Indicator control.
AT+CLCK Under parameter "PS" lock, the following statement
has been removed: "ME may remember numbers of
previously used cards."
AT+CMER New AT command: Mobile equipment event reporting.
AT^MONI Statement regarding RING line revised.
At^MONP
AT^SNFA New AT command: Set or query microphone attenua-
tion
AT^SSDA New AT command: Set Display Availability
+CIEV: <text> added to list of URCs
Added to Chapter 9.2 (PIN 1 required).
AT+CCWA,
AT+CMER,
AT^SSDA
AT+CIND Added to Chapter 9.3 (PIN1 independent)
AT^SNFA
AT command What is new
Note regarding sequential order of concatenated commands added.
AT+CBST Command syntax corrected: Parameter <speed> is
mandatory.
AT+CCFC New <class> parameters added.
AT+CFUN SLEEP mode described in greater detail
AT+CLCK New <class> parameters added.
AT+CPIN Timing algorithm of incorrect password corrected
AT+CSQ Note added: Realistic BER values can be obtained
only if there is a call in progress.
AT+CPMS Difference between SM, ME and MT storage ex-
plained.
AT^SGAUTH New command to specify protocol for PPP authentica-
tion
AT^MONI Channel numbers are now issued in the form of 4-digit
numbers. Therefore, the examples on page 186 have
been updated.
Frequency hopping will now be indicated with "h" (in-
stead of the previously used "0".
Page 11 of 256 15.07.2002