At+Csca Sms Service Centre Address - Siemens MC35 Command Set

AT Command Set

5.12 AT+CSCA SMS service centre address

Test command Response
OK
AT+CSCA=?
Read command Response
+CSCA: <sca>,<tosca> OK
AT+CSCA?
Parameter
See write command
Write command
TA updates the SMSC address, through which mobile originated SMs are
transmitted. In text mode, setting is used by send and write commands. In PDU
AT+CSCA=<sca>
mode, setting is used by the same commands, but only when the length of the
[,<tosca>]
SMSC address coded into <pdu> parameter equals zero.
Note:
Response
OK
Parameter
<sca>
<tosca> Service centre address format GSM 04.11 RP SC address Type-of-
Reference Note
GSM 07.05 If no parameter is entered after AT+CSCA= the content of <sca> will be deleted.
MC35_ATC_01_V05.00
This command writes the service centre address to non-volatile memory.
GSM 04.11 RP SC address Address value field in string format; BCD
numbers (or GSM default alphabet characters) are converted into
characters; type of address given by <tosca>
Maximum length of address: 20 characters
Address octet in integer format (default refer <toda> )
Page 154 of 256 15.07.2002