At+Cpbw Write Phonebook Entry - Siemens MC35 Command Set

AT Command Set

4.34 AT+CPBW Write phonebook entry

Test command Response
TA returns location range supported by the current storage, the maximum
AT+CPBW=?
length of <number> field, supported number formats of the storage and the
maximum length of <text> field.
Note: The length may not be available while SIM storage is selected. If storage
does not offer format information, the format list should be empty parenthe-
sises.
+CPBW: (list of supported <index>s ), <nlength> , (list of supported <type>s ),
<tlength> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command.
Write command This command writes a phonebook entry to the memory location <index> of the
AT+CPBW=
active memory.
[<index>]
The memory location number <index> is followed by the phone number <num-
[,<number>
ber> (in the format <type>) and the associated <text>.
[[,<type>]
If writing fails, an ME error +CME ERROR: <err> is returned.
[,<text>]]]
Parameter
<index>
<number>
<type>
<text>
<nlength>
<tlength>
Response
OK/ERROR/+CME ERROR
To delete a phonebook entry simply enter the location number:
AT+CPBW=<index>
To write a phonebook entry to the first free location number:
AT+CPBW=,<number>,<type>,<text>
Reference Note
GSM 07.07 If <text> contains characters which are coded differently in ASCII and GSM
(e.g. Ä, Ö, Ü), these characters have to be entered via escape sequences as
described in Chapter 1.5.
MC35_ATC_01_V05.00
Location number within phonebook memory, total range is given
in test command response
Phone number, maximum length is given as <nlength> in test
command response
Type of phone number (address octet in integer format); 145 when
dialling string includes international access code character "+",
otherwise 129 (refer GSM 04.08 subclause 10.5.4.7)
Text assigned to the phone number, maximum length is given in
test command response <tlength>. Character set as specified with
+CSCS. See note below.
Max. length of phone number, normally 20, for a small number of
locations 40
Max. length of text assigned to phone number (depending on
storage type 16 - 18 characters including blanks)
Page 110 of 256 15.07.2002