Siemens MC35 Command Set page 251

AT Command Set
*# code
USSD messages
[C]...[C]#
(varies with the serving network)
C[C] (excluded 1[C])
(varies with the serving network)
Abbreviations of codes and responses used in Table 15
Codes / parameters to be sent with ATD
ZZ = type of supplementary services:
DN = dialling number:
BS = basic service
equivalent to parameter <class>
T = time in seconds
PW = Password
C = character of TE character set (e.g. asterix, hash or digit in case of USSD, or digits in case of held calls or multiparty calls)
Possible responses
<m>
<n>
<status>
<class>
<fac>
<reason>
Function of *# codes for Supplementary Services
*# code Abbreviation used in
Chapter 9.4
act
*
reg
**
*# int
# deact
## eras
MC35_ATC_01_V05.00
Functionality
Send USSD message
Send USSD message
Barring services
All services
String of digits 0-9
Voice
FAX
SMS
SMS +FAX
Voice + FAX
Voice + SMS + FAX
Data circuit asynchron
Data circuit synchron
PAD
Packet
Data circuit asynchron + PAD
Data circuit synchron + packet
Data circuit asynchron + syncron. + PAD
All Services
Mode: 0 = not active, 1 = active
Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
Status: 0 = not active, 1 = active
Represents BS = basic service
See Chapters 4.6 (AT+CCFC), 4.21 (AT+CLCK) and 9.4.1.
Facility lock. See Chapter 4.21 (AT+CLCK)
Call forwarding reason
Function
Activate (except for CLIR, see list above)
Register and activate
Check status (interrogate)
Deactivate (except for CLIR, see list above)
Unregister and deactivate
Page 251 of 256
Possible response(s)
+CME ERROR: <err> /
OK (see Chapter 4.48, p. 132)
+CME ERROR: <err> /
OK (see Chapter 4.48, p. 132)
330
Not specified
11
13
16
12
19
10
25
24
27
26
21
22
20
---
15.07.2002