At+Fet End A Page Or Document; At+Fk Kill Operation, Orderly Fax Abort; At+Flid Query Or Set The Local Id Setting Capabilities - Siemens MC35 Command Set

AT Command Set

3.13 AT+FET End a page or document

Write command This command indicates that the current page or partial page is complete. An
ERROR response code results if this command is issued while the mode is on-
AT+FET=<ppm>
hook.
Response
OK
Parameter
<ppm>
Reference Note
EIA PN-2388 Used for Faxclass 2 only

3.14 AT+FK Kill operation, orderly FAX abort

Execute command
This command causes the TA to terminate the session in an orderly manner.
AT+FK Response
OK
Reference Note
Used for Faxclass 2 only

3.15 AT+FLID Query or set the Local Id setting capabilities

Test command Response
(max. character length of Local ID string) (range of supported ASCII character
AT+FLID =?
values) OK
Parameter
See write command
Read command Response
< lid > OK
AT+FLID?
Parameter
See write command
Write command Response
OK
AT+FLID =<lid>
Parameter
<lid>
Reference Note
EIA PN-2388 See also "AT+FCIG Query or set the Local polling id", pg. 50.
Used for Faxclass 2 only
MC35_ATC_01_V05.00
Post Page Message Codes
1 another document next
2 no more pages or documents
4 another page, procedure interrupt
5 another document, procedure interrupt
Local ID string, max. length and possible content as reported by test
command. Default value is empty string ("").
Page 57 of 256 15.07.2002