At+Csdh Show Sms Text Mode Parameters - Siemens MC35 Command Set

AT Command Set

5.14 AT+CSDH Show SMS text mode parameters

Test command Response
+CSDH: (list of supported <show>s) OK
AT+CSDH=?
Parameter
See write command
Read command Response
+CSDH:<show> OK
AT+CSDH?
Parameter
See write command
Write command Response
AT+CSDH= TA sets whether or not detailed header information is shown in text mode result
<show> codes.
OK
Parameter
<show>
Reference Note
GSM 07.05
MC35_ATC_01_V05.00
0 do not show header values defined in commands +CSCA
and +CSMP (<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>)
nor <length>, <toda> or <tooa> in +CMT, +CMGL, +CMGR
result codes for SMS-DELIVERs and SMS-SUBMITs in text
mode; for SMS-COMMANDs in +CMGR result code, do not
show <pid>, <mn>, <da>, <toda>, <length> or <cdata>
1 show the values in result codes
Page 156 of 256 15.07.2002