Toshiba e-STUDIO6520c Imaging Manual page 73

(2) Press the [IMAGE] button on the Control Panel. Press the [SHARPNESS] button.
Press the [SOFT] button to soften the copy image.
After softening the copy image, copy and check the copy image quality.
If further image quality adjustments is necessary, go to the next step.
(3) Enter adjustment mode [05].Change the values for codes [604] to [606], [922], [1737] to [1741], [1757],
[7795] and [7807] to [7809] to adjust the default value for the sharpness intensity.
* Decreasing the sharpness intensity will minimize moiré.
Color mode Original mode
Text / Photo
Black
User custom
Image smoothing
Text / Photo
Printed image
Full color
User custom
Text / Photo
ACS / Black
* The smaller the value is, the weaker the sharpness intensity becomes. The larger the setting value is, the
stronger the sharpness intensity becomes.
Changing the values for these codes will change the sharpness intensity, when the "Sharpness" indicator in
the "IMAGE" menu is set to the center. Remember that 1 step of the indicator will increase or decrease the
sharpness intensity by 25. If the sharpness intensity of the center value is changed, each step of the
indicator will be changed accordingly. (For instance, if the center value is decreased by 25 (softer), the
value of each step of the indicator will also be decreased by 25 (softer).)
However, the range of adjustment values that is valid for sharpness level change is from -100 to +100 of
the total of the setting value of the adjustment code and that of the indicator. For instance, if the setting
value of the adjustment code is "103" (-25 from the default value), the limit of the steps in the soft side of
the indicator is "-3". If the step is set at "-4", the image quality will not be changed.
e-STUDIO5520C/6520C/6530C
[05] code
05-604
Text 05-605
Photo 05-606
05-922
05-7809
05-1737
Text 05-1738
05-1739
Photo 05-1740
Map 05-1741
05-7795
05-1757
Text 05-7807
Photo 05-7808
2-39
2. Copier-specific Adjustments
Accepta
Recommended
ble value
value
range
Set a value smaller
than 128.
0 to 255
28 to 127
Set a value smaller
than 128.
0 to 255
28 to 127
Set a value smaller
than 128. 0 to 255
28 to 127
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Default
128
128
128