Toshiba e-STUDIO6520c Imaging Manual page 189

PS3
* Applicable only to 1200dpi
(2) Enter the adjustment mode [05]. Increase the setting value of the code [8242] to increase the density level of
thin lines by emphasizing them.
PDL Color
PS3 Black
(1200dpi)
Color
<Note> When the setting value of the color adjustment is increased, thin lines in light colors in printing
at 1200 dpi may turn out darker than at 600 dpi.
For example, when a 3D object such as Word Art is printed at 1200 dpi, the border lines may
become darker.
After setting the value, print the image and check its image quality.
If further image quality adjustment is necessary, use the following procedure:
PS3
* Applicable only to 1200 dpi
(3) Enter the adjustment mode [05]. Change the setting value of the code [8243] to adjust a range for
emphasizing thin lines.
PDL Color
Black (Min.)
PS3 Black (Max.)
(1200dpi)
Color (Min.)
Color (Max.)
After changing the value, perform printing and check the image quality.
If further image quality adjustments are necessary, follow the next step. However, the service technician
shall judge whether or not the adjustment is to be performed in conjunction with the settings in steps (1) to
(3).
e-STUDIO5520C/6520C/6530C
[05] code Subcode Recommended value
0 Set value larger than 3
05-8242
1 Set value larger than 1
[05] code Subcode Recommended value
0 Set value larger than 1
1 Set value smaller than 200
05-8243
2 Set value larger than 1
3 Set value smaller than 255
© 2008 TOSHIBA TEC CORPORATION All rights reserved
3-69
3. Printer-specific Adjustments
Acceptable
Default
value range
3
0 to 5
1
Acceptable
Default
value range
1
200
0 to 255
1
255