Format Connection Table - Barco LED-PRO User Manual

cçêã~í=`çååÉÅíáçå=q~ÄäÉ
Use the following table to connect various source formats to LED-PRO, using the system's
universal input connectors in conjunction with a customer supplied VGA to 5 x BNC
breakout cable. Please note:
•
•
•
•
Using a customer supplied VGA to 5 x BNC breakout cable, multiple input combinations
are possible. Cells with checks denote the connections required for the indicated format.
Table 3-2. Analog Input Combinations using Breakout Cable
Breakout Cable Composite
Wire Color Video
R
G
B
H Sync
V Sync
Please contact Barco Technical Support for information on obtaining breakout cables. In
Appendix C, refer to the
LED-PRO • User's Guide
RGB format — typical devices: Computers
S-Video (Y/C) format — typical devices: S-Video DVD or VCR
YUV or YP P (Betacam) format — typical devices: DVD player, Betacam deck
b r
Composite format — typical devices: NTSC/PAL DVD or VCR
Note For RGB with H and V sync, use the VGA connector directly.
S-Video YUV
(Y/C) (YP
(P
(Chrom)
(Lum)
(Lum)
(P
"Contact Information" section on page 162 for details.
RGB
P ) Sync on Green
b r
)
r
)
b
3. Installation

Format Connection Table

RGB RGB
Comp Sync Separate H V
23