Enetm; Edhcp - Barco LED-PRO User Manual

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
•
bae`m
•
•
•
bb`el=ãçÇÉ
•
•
bfm=ñññKñññKñññKñññ==óóóKóóóKóóóKóóó=òòòKòòòKòòòKòòò
•
•
•
bj^`\
•
•
154
Usage: ENETM mode [0|1] Off|On
Description: Sets DHCP mode.
Parameters: mode - DHCP mode [0-1] Off | On
Query:

EDHCP?

Returns the DHCP mode in the format
= mode
EDHCP 1 (Sets DHCP mode to On)
EDHCP? (Queries the DHCP mode)
Description: Disable/Enable echo on telnet window (for Microsoft Windows XP
telnet window, echo must be disabled.)
Parameters: mode - Disable/Enable telnet echo (0 / 1)
EECHO 0 (Disable echo on telnet window)
Description: Set static IP address, subnet mask and default Gateway IP
Parameters:
IP address - xxx.xxx.xxx.xxx (xxx: [0-255])
Subnet mask - yyy.yyy.yyy.yyy (yyy: [0-255])
Gateway IP - zzz.zzz.zzz.zzz (zzz: [0-255])
Query:
EIP?
Returns the Ethernet IP address, Subnet mask and Gateway IP in the format
= xxx.xxx.xxx.xxx
zzz.zzz.zzz.zzz
Note If DHCP is used, Subnet mask and Gateway IP is not used by
the LED-PRO.
EIP 192.168.000.200 255.255.255.000 192.168.000.001 (Sets IP address to
192.168.0.200, subnet mask to 255.255.255.0, and default Gateway IP to
192.168.0.1)
EIP? (Returns IP address, subnet mask and Gateway IP)
Description: Query Ethernet MAC address for the LED-PRO. Note that each
LED-PRO unit will have a different MAC address.
Parameters: None
yyy.yyy.yyy.yyy
LED-PRO • User's Guide