Expert Mode - Barco LED-PRO User Manual

4. Operation
Using the Setup Menu
To save the system state:
1.
2.
3.
c~Åíçêó=oÉëÉí
From the Setup Menu, select Factory Reset to display the Factory Reset Menu, which
enables you to reset LED-PRO to its "factory default" condition.
C l e a r a l l c o n f i g s ,
f o r m a t s , p r e s e t s ?
Figure 4-24. Factory Reset Menu
Note that this procedure deletes all saved user information, input configurations, output
configuration, custom formats, presets and the LOGO (if stored in flash memory).
To perform a factory reset:
1.
52
Select the input button (in the front panel Inputs Section) that you want to be
acquired and selected at power-up.
Press SETUP to display the Setup Menu.
Select the Save System State line and press SEL. The "Saving System State"
message appears, confirming the process.
Note This procedure is identical to the Save System State
procedure located in the System Menu (SETUP > Expert
Mode > System).
< S E L > = Y e s
<ESC> = No
Select the Factory Reset line and press SEL.
~
Press SEL to perform a factory reset. A confirmation menu is shown,
and the system is rebooted.
~
Press ESC to return safely to the previous menu.
Note This procedure is identical to the Factory Reset procedure
located in the Expert Mode Menu (SETUP > Expert Mode).
LED-PRO • User's Guide