4. Operation
Using the Setup Menu
pçìêÅÉ=^äáÖåãÉåí=Ô=paf
From the Setup Menu (for an SD-SDI or HD-SDI input source), select Source Alignment
to display the SDI Source Alignment Menu. This menu enables you to adjust all aspects
of the source's "visible" parameters.
S O U R C E A L I G N M E N T
> Co ntrast
Figure 4-17. SDI Source Alignment Menu (sample)
Following are descriptions of each SDI Source Alignment Menu function:
•
•
•
•
•
•
•
•
`çåíê~ëí
From the SDI Source Alignment Menu, select Contrast to adjust the overall contrast of
the selected SDI input.
•
•
_êáÖÜíåÉëë
From the SDI Source Alignment Menu, select Brightness to adjust the overall brightness
of the selected SDI input.
•
•
eìÉ
From the SDI Source Alignment Menu, select Hue to adjust the hue of the selected input.
Note that Hue is not applicable for YPbPr inputs.
•
•
46
B r i g h t n e s s
Hu e
Sat u r a t i o n
Sha rpness
C l i p t o S u b B l k
L u m a T r a c k i n g
E D I D D V I
Contrast
Brightness
Hue
Saturation
Sharpness
Clip to SubBlk
Luma Tracking
EDID DVI
The adjustment range is 75.0% to 125.0%.
100% is the default setting.
The adjustment range is 75.0% to 125.0%.
100% is the default setting.
The adjustment range (in degrees) is -180 to +180.
0 is the default setting.
100. 0
100. 0
+0
100
+0
+0
+0
>>
LED-PRO • User's Guide