Table of Contents
Advertisement
4. CONTROL CLIENT SOFTWARE
About
The Control Client connects a remote computer to the IOSONO ONE. The Control Client Main Window allows access to the File
Browser, the Factory Reset options and the Play Config software of the IOSONO ONE.
For installation details of the Control Client Software, please see the Quick Start Guide that has been delivered with the IOSONO
ONE.
4.1
Connection To An IOSONO ONE
4.1.1
Connect the Control Client To An IOSONO ONE
To start the Control Client and connect to an IOSONO ONE
1. Set up a network connection between a remote computer and the IOSONO ONE (Port MAIN). Configure the remote computer's
network interface to the same network as the IOSONO ONE.
Static IP: 192.168.1.x (x being a number between 2 and 254). Network mask: 255.255.255.0
2. Start the Control Client via Windows-Startmenu/Programs/IOSONO/Spatial Audio Processor. At connection dialog enter the IP
Address of the IOSONO ONE and select connect. (image 4-1)
Image 4-1
Connecting dialog
4.1.2
Factory Network Settings Of The IOSONO ONE
Factory Network Settings
Item
IP Adress
Subnet Mask
Gateway
DHCP
4.1.3
Connect To An IOSONO ONE With Unknown Network Settings
About
In case the network configuration of the IOSONO ONE is corrupt or unknown, it becomes necessary to reset the network interface
configuration of the MAIN port of the IOSONO ONE, by doing the following:
To connect to an IOSONO ONE with unkown network settings
1. Connect an USB flash drive with a FAT file system to your remote computer
2. In the root file system of the USB flash drive, create a *.txt file and rename it to iosono_network_reset.ion
3. Type your desired network configuration in this file, e.g.:
IPADDR 192.168.1.1
NETMASK 255.255.255.0
GATEWAY 0.0.0.0
R5906747 IOSONO ONE 16/05/2017
Factory Settings
192.168.1.1
255.255.255.0
0.0.0.0
OFF
4. Control Client Software
9
Advertisement
Table of Contents
