Presets; Recall; Delete - Barco LED-PRO User Manual

mêÉëÉíë
From the Setup Menu, select Presets to display the Global Preset Menu, which enables
you to store, recall or delete up to 16 Presets (or "Views"). Each Preset is essentially a
"global" combination of pan and zoom settings which can be applied to any input. Whereas
the Presets in the Pan & Zoom Menu are input specific, "global" Presets in the Setup
Menu are independent of any specific input.
Please note:
•
•
•
The figure below illustrates the Global Preset Menu:
PRESET
> Re ca ll
Figure 4-19. Global Preset Menu
Following are descriptions of each menu function:
•
•
•
oÉÅ~ää
From the Global Preset Menu, select Recall to display the Recall Preset Menu, which
enables you to choose a stored Preset and assign it to the currently selected input.
R E C A L L P R E S E T
> P r e s e t
Figure 4-20. Recall Preset Menu
To recall a global preset:
1.
2.
LED-PRO • User's Guide
You can define a global Preset that maps the entire input image to the upper
left quarter of the output image.
A global Preset is defined by first creating the desired image settings in the Pan &
Zoom Menu.
Once created, the settings may be saved (and named) in the Global Preset
Menu under the Setup Menu heading. (Presets cannot be named in the Pan &
Zoom Menu.)
A stored global Preset can be recalled and applied to the currently selected input.
S a v e
De lete

Recall

Save

Delete

Re ca ll
On the Preset line, press SEL. The navigation cursor (>) changes to the edit
cursor (#).
Choose a Preset by turning the knob, and "accept" it by pressing SEL. Note that
15 Presets are listed, along with the "Default" preset which contains default pan
(0%) and zoom (100%) settings.
Using the Setup Menu
>>
>>
>>
D e f a u l t
4. Operation
49