Voicemail Pick-Up - Avaya Compact DECT Installation Manual

Voicemail Pick-up

DECT handsets can be programmed such that the DECT handset can pick-
up and listen to a desktop phone's Voicemail. These DECT handset are
normally set to be a slave of a desktop phone (see page 36).
Perform the following:
1. Where appropriate, check that the DECT handset is set as a slave of a
2. From Programs/IP Office, open the Manager application. The default
3. Open the Configuration Tree (File/Open). The default password for the IP
4. In the Configuration Tree, open User to display all available users.
5. For the analogue port extension number assigned to the slave DECT
6. Select the ShortCodes tab, right click in the box and select Add.
7. Enter *17 (VoiceMail pick-up code) in Code,
8. Enter "name" (where name is the Name given to the Desktop phone) in
9. Set Feature to VoicemailCollect as shown below
10.
11. Select the SourceNumbers tab, right click in the box and select Delete
12. Click OK to finish.
13. For the User assigned to the Desktop phone, right click in the User icon
14. Where the Desktop phone has been allocated password protection for
15. Permit a 'trusted location' to access the Desktop phone's voice mailbox
16. Ensure that slaved DECT handsets must enter a passcode to access
17. To make the DECT handset a 'trusted location' (e.g. where no is
18. To ensure that the DECT handset must enter the Desktop's password
19. Save the configuration by clicking on the disc icon
20. Ensure that the Voice Mail Server is running; Programs/IP
Compact DECT - Installation Manual
38DHB0002UKFH – Issue 5 (27th October 2003)
desktop phone.
password for Administrator is Administrator, however this must be
changed as early as possible.
Office configuration is password, however this password must changed
as early as possible.
handset, right click in the User icon and select Edit.
Telephone Number).
(this tab must not contain any entries).
and select Edit and select the SourceNumber tab.
it's voice mailbox, you can either:
without a password.
OR
the Desktop phone's voice mailbox.
password required) right click in the SourceNumber box and add Vxxx
(where xxx is the extension number of the DECT handset). Do not edit
any other 'trusted numbers' that may appear.
to access the Desktop's voicemail box, check that the SourceNumber
box does not contain Vxxx (where xxx is the extension number of the
DECT handset). Do not edit any other 'trusted numbers' that may appear.
Office/VoiceMail.
IP Office Integration - Page 39
in the menu bar.
Page 39
DECT Configuration Software