Introduction; General - Avaya Compact DECT Installation Manual

Introduction

General

This manual covers the installation, maintenance and programming of an
Compact DECT system. It is intended for use by installers and maintainers
who have successfully completed an appropriate Compact DECT training
course.
The Compact DECT is a cordless telephone system designed to work with
most PABX switch systems. It provides the PABX with integrated support for
cordless handsets.
A Compact DECT Base Station (CDBS) can support up to six simultaneous
calls and up to eight 20DT handsets. Each handset requires a dedicated two-
wire link between the CDBS and the Coms. Platform.
Compact DECT conforms to the DECT Generic Access Profile (GAP)
requirements. This allows other GAP handsets to be used on the system. It
also allows the Compact DECT handsets to be used on other GAP
compatible DECT systems.
Approvals:
Compact DECT - Installation Manual
38DHB0002UKFH – Issue 5 (27th October 2003)
RJ11 RJ45 Access for
Power PC twisted pair cable
Plug orientation
Viewed from bottom
Plug top
PSU
V24 (INDeX) Cable
LAN (IP Office) Cable
(not supplied)
Required for DECT
Integration
– Electric:
– Access Profile:
– EMC:
Compact DECT
Base Station
PC Cable
(not supplied)
a b a b a b a b
Communications Platform
Up to eight analogue extension ports
TBR 6 (DECT RF).
TBR22 (GAP) Layer 1.
ETS 300 329 (CE Labelling).
Introduction - Page 3
Compact DECT
Repeater(s)
Max of six
Up to 8 Handsets
With max. of 6
Simultaneous calls
Twisted Pair Cable
(not supplied)
a b a b a b a b
Page 3
General