Table of Contents
Advertisement
DECT Configuration Software
With the Site Survey performed (see page 6), the Base Station installed and
all DECT handsets Registered (see pages 13 and 15), the IP Office DECT
Configuration software can be installed.
DECT Software Installation
The DECT Configuration software is installed from the IP Office
Administration CD and can be installed onto any Windows 95 or higher PC.
Perform the following:
1. On the PC running on the same TCP/IP LAN as the IP Office control unit,
2. If the CD Autoruns click Cancel and manually open the CD. Select the
3. Follow the installation Wizard and when installation is completed, click
IP Office Licences
To install the DECT licence, perform the following:
1. From Start | Programs | IP Office, open the Manager application. The
2. Open the Configuration Tree (File/Open). The default password for the IP
3. Click on the Licence icon and, in the right hand field, right click and select
4. Enter a valid Licence string for the Compact DECT (obtained from your
IP Office User Configuration
A fixed range of analogue extensions (Users) must be allocated to DECT
handsets. Each User assigned to a DECT handset must be configured and
the Internal directory set up. Perform the following:
1. From Start | Programs | IP Office, open the Manager application. The
2. Open the Configuration Tree (File/Open). The default password for the IP
3. In the Configuration Tree, open User to display all available Users.
4. For each analogue port assigned to a DECT handset, right click in the
5. In the User tab enter both a Name and Full Name. These names should
6. Select the Voicemail tab and ensure that:-
Compact DECT - Installation Manual
38DHB0002UKFH – Issue 5 (27th October 2003)
insert the IP Office Administration CD.
DECT folder and click on Setup.
Finish.
default password for Administrator is Administrator, however this must
be changed as early as possible.
Office configuration is password, however this password must changed
as early as possible.
New
supplier). The DECT Configuration Licences are for 8, 16 or 64
extensions.
default password for Administrator is Administrator, however this must
be changed as early as possible.
Office configuration is password, however this password must changed
as early as possible.
CAUTION: This password must always be entered into the DECT
Configuration menu regardless of whether or not the DECT
is slaved to a desktop phone (see page 36).
User icon and select Edit.
be unique to each DECT handset and will represent the Internal
directory.
DECT is required that the Voicemail On box is ticked.
- Where voicemail for the DECT or the DECT is to be slave of a desktop
phone (see page 36), that the Voicemail On box is empty.
IP Office Integration - Page 35
When voicemail for the
DECT Configuration Software
Page 35
Advertisement
Table of Contents
