Table of Contents
Advertisement
Page 34 - IP Office Integration
Installation Overview
To install DECT Integration software with IP Office the following steps must
be performed in sequence:
1. Perform the Site Survey (see page 6) and install Compact DECT Base
2. Register each DECT handset using the CCFP Administration program
3. Install DECT Configuration software on the PC running IP Office
4. DECT configuration must be licenced (see page 35) to utilize IP Office
5. Configure, within the IP Office Manager program, each User (analogue
6. Options:
7. On completion, the Voice Mail server must be switched on (Programs/IP
Page 34
DECT Integration
Station (see page 13 ). The Compact DECT Base Station must be
permanently connected to the PC.
(see page 15). The Local No. must be the extension number allocated to
the analogue port of the IP Office (see page 35).
Administration (see page 35).
integration.
port allocated to a DECT handset, (see page 35).
- Slave a DECT handset with an IP Office desktop phone (see page 36)
- Set Voicemail pick-up from a DECT handset operating as a slave of a
desktop phone (see page 39) with or without password protection.
Office/VoiceMail).
Compact DECT - Installation Manual
38DHB0002UKFH – Issue 5 (27th October 2003)
Advertisement
Table of Contents
