Address; Lan - Planet MH-4000 User Manual

Multi-Homing Security Gateway User's Manual

4.3 Address

MH-2K/4K allows the Administrator to set addresses of the LAN network, LAN network group, WAN network,
WAN group, DMZ network and DMZ group. These settings are to be used for policy editing.
What is the Address Table?
An IP address in the Address Table can be an address of a computer or a sub network. The Administrator can
assign an easily recognized name to an IP address. Based on the network it belongs to, an IP address can be
LAN IP address, WAN IP address and DMZ IP address. If the Administrator needs to create a control policy
for packets of different IP addresses, he can first add a new group in the LAN Network Group or the WAN
Network Group and assign those IP addresses into the newly created group. Using group addresses can
greatly simplify the process of building control policies.
How to use Address Table
With easily recognized names of IP addresses and names of address groups shown in the address table, the
Administrator can use these names as the source address or destination address of control policies. The
address table should be built before creating control policies, so that the Administrator can pick the names of
correct IP addresses from the address table when setting up control policies.

4.3.1 LAN

Entering the LAN window
Step 1. Click LAN under the Address menu to enter the LAN window. The current setting information
such as the name of the LAN network, IP and Netmask addresses will show on the screen.
Definition
Name: Name of LAN network address.
IP: IP address of LAN network
Netmask: subnet mask of LAN network.
MAC Address: MAC address corresponded with LAN IP address.
Configure: You can configure the settings in LAN network. Click Modify to change the parameters in LAN
- 52 -