Configure Wan 1 Interface - Planet MH-4000 User Manual

3.2 Configure WAN 1 interface

After entering the username and password, MH-2K/4K WebUI screen will display. Select the Interface tab on
the left menu then click on WAN below it.
Click on Modify button of WAN NO.1. The following page is shown.
Alive Indicator Site IP: This feature is used to ping an address for detecting WAN connection status.
Service: ICMP You can select an IP address by Assist, or type an IP address manually.
Service: DNS You can select a DNS IP and Domain name by Assist, or type the related data manually.
PPPoE (ADSL User): This option is for PPPoE users who are required to enter a username and password in
order to connect.
Username: Enter the PPPoE username provided by the ISP.
Password: Enter the PPPoE password provided by the ISP.
IP Address provided by ISP:
Dynamic: Select this if the IP address is automatically assigned by the ISP.
Fixed: Select this if you were given a static IP address. Enter the IP address that is given to you by
your ISP.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
Service-On-Demand:
The PPPoE connection will automatically disconnect after a length of idle time (no activities). Enter in
the amount of idle minutes before disconnection. Enter '0' if you do not want the PPPoE connection to
disconnect at all.
Multi-Homing Security Gateway User's Manual
- 8 -