Wan - Planet MH-4000 User Manual

4.3.3 WAN

Entering the WAN window
Step 1. Click WAN under the Address menu to enter the WAN window. The current setting information,
such as the name of the WAN network, IP and Netmask addresses will show on the screen.
Definitions
Name: Name of WAN network address.
IP/Netmask: IP address/Netmask of WAN network.
Configure: Configure the settings of WAN network. Click Modify to change the settings of WAN network.
Click Remove to delete the setting of WAN network.
NOTE: In the WAN Network window, if one of the members has been added to Policy or LAN Group, the
Configure column will show the message – In Use. In this case you are not allowed to modify or remove the
settings.
Adding a new WAN Address
Step 1. In the WAN window, click the New Entry button.
Step 2. In the Add New Address window, enter the settings for a new WAN network address.
Step 3. Click OK to add the specified WAN network or click Cancel to discard changes.
Multi-Homing Security Gateway User's Manual
- 58 -