Snmp (Mh-4000 Only) - Planet MH-4000 User Manual

Make the necessary changes needed.
Step 2:
Click OK to save changes or click on Cancel to cancel modifications.
Step 3:
Removing a Host Table
Step 1: In the Host Table window, find the policy to be removed and click the corresponding Remove option
in the Configure field.
A confirmation pop-up box will appear, click OK to remove the DNS Proxy or click Cancel.
Step 2:

4.1.11 SNMP (MH-4000 only)

The administrator could send the information to SNMP by enabling SNMP Agent.
NOTE: This function is not supported on MH-2000.
Step 1: Enable SNMP Agent.
Step 2: Enter Appliance Name.
Step 3: Enter Appliance Location.
Step 4: Enter Community.
Step 5: Enter Contact Person.
Step 6: Enter Description or not.
Multi-Homing Security Gateway User's Manual
- 39 -