4.12 Inbound Balance (MH-4000 only)
MH-4000 provides the function of Inbound Load Balance to the enterprise's website. When customers visit
the website and the internet is disconnected, customers still can connect to the website via the other lines
instead of missing the chance of business.
NOTE: This function is not supported on MH-2000.
This chapter describes the detail introduction of Inbound Load Balance and steps to setup Inbound Load
Balance.
Pre-requirement
1. Register the Domain Name, for example, planet.com.tw. You need to visit the Network Information Center
in local (i.e., the origination in Taiwan and China is TWNIC (Taiwan Network Information Center) and
CNNIC (China Network Information Center) respectively) to register the domain name.
2. Suppose the IP Address which is registered as below,
61.11.11.11 ~ 61.11.11.15
211.22.22.22~ 211.22.22.26
3. Setup the Primary Domain Name Server:
Host Name dns1.planet.com.tw
IP Address 6 1 .11 .11 .11
Setup the Secondary Domain Name Server:
Host Name dns2.planet.com.tw
IP Address 211 .22 . 22 .2 2
Enter the Inbound Load Balance configuration page
Click on Inbound Balance on the menu, the following page is shown.
Multi-Homing Security Gateway User's Manual
- 180 -