Date/Time - Planet MH-4000 User Manual

4.1.3 Date/Time

Synchronizing the MH-2K/4K with the System Clock
Administrator can configure MH-2K/4K's date and time by either syncing to an Internet Network Time Server
(NTP) or by syncing to your computer's clock.
Follow these steps to sync to an Internet Time Server
Enable synchronization by checking the
Step 1.
Click the down arrow to select the offset time from GMT.
Step 2.
Enter the Server IP Address or Server name with which you want to synchronize.
Step 3.
Update system clock every 5 minutes You can set the interval time to synchronize with outside
Step 4.
servers. If you set it to 0, it means the device will not synchronize automatically.
Follow this step to sync to your computer's clock.
Click on the Sync button.
Step 1.
box.
Click OK to apply the setting or click Cancel to discard changes.
- 24 -
Multi-Homing Security Gateway User's Manual