Group - Planet MH-4000 User Manual

4.4.3 Group

Accessing the Group window
Step 1. Click Group under it. A window will appear with a table displaying current service group settings
set by the Administrator.
Definitions:
Group name: The Group name of the defined Service.
Service: The Service item of the Group.
Configure: Configure the settings of Group. Click Modify to change the parameters of the Group. Click
Remove to delete the Group.
NOTE: In the Group window, if one of the Service Groups has been added to Policy. "In Use" message will
appear in the Configure column. You are not allowed to modify or remove the settings. Go to the Policy
window, remove the Service group first, and then you are allowed to configure the setting.
Adding Service Groups
Step 1. In the Group window, click the New Entry button.
Step 2. In the Add Service Group window, the following fields will appear:
Available Services: list all the available services.
Selected Services: list services to be assigned to the new group.
Step 3. Enter the new group name in the group Name field. This will be the name referencing the
created group.
Step 4. To add new services: Select the services desired to be added in the Available Services list
and then click the Add>> button to add them to the group.
Multi-Homing Security Gateway User's Manual
- 73 -