Status; Interface Status; System Info (Mh-4000 Only) - Planet MH-4000 User Manual

Multi-Homing Security Gateway User's Manual

4.17 Status

In this section, the device displays the status information about MH-2K/4K. Status will display the network
information from the Configuration menu. The Administrator may also use Status to check the DHCP lease
time and MAC addresses for computers connected to MH-2K/4K.

4.17.1 Interface Status

Entering the Interface Status window
Click on Status in the menu bar, then click Interface Status below it. A window will appear and provide
information from the Configuration menu. Interface Status will list the settings for LAN Interface, WAN 1/2
Interface, and DMZ Interface.

4.17.2 System Info (MH-4000 only)

NOTE: This function is not supported on MH-2000.
Entering the System Info window
Click on Status in the menu bar, then click System Info below it. A window will appear and display a table
with CPU Utilization / Memory Usage and Ram Disk Usage, the device will list them in this System Info.
- 230 -