Wan - Planet MH-4000 User Manual

4.2.2 WAN

Entering the Interface menu
Click on Interface in the left menu bar. Then click on WAN below it. The current settings of the interface
addresses will appear on the screen.
Balance Mode:
Auto: MH-2K/4K distributes the WAN 1/2 download by proportion automatically according to the WAN
download bandwidth. (For users who are using various download bandwidth)
Round-Robin: MH-2K/4K distributes the WAN 1/2 download bandwidth 1:1, in other words, it selects
the agent by order. (For users who are using same download bandwidths)
By Traffic: MH-2K/4K distributes the WAN 1/2 download bandwidth by traffic. (For users who are
connected to the Internet via a fixed WAN IP address)
By Session: MH-2K/4K distributes the WAN 1/2 download bandwidth by session. (For users who are
connected to the Internet via a fixed WAN IP address)
By Packet: MH-2K/4K distributes the WAN 1/2 download bandwidth by packet and saturated
connection. (For users who are connected to the Internet via a fixed WAN IP address)
WAN No: WAN port 1 or 2.
Connect Mode: Display the current connection mode: PPPoE, Dynamic IP Address (Cable Modem User) or
Static IP Address.
IP Address: Display the current WAN IP Address.
Saturated Connections: Set the number for saturation whenever session numbers reach it, the MH-2K/4K
switches to the next WAN port on the list. This function is only applicable for By Session mode.
Ping / HTTP/ HTTPS: Display Ping/HTTP/HTTPS functions of WAN 1/2 to show if they are enabled or
disabled. (HTTPS is only available with MH-4000)
Configure: Click Modify to modify WAN 1/2 settings.
Priority: Set priority of WAN 1/2 for Internet Access.
WAN 1/2 Interface
Multi-Homing Security Gateway User's Manual
- 45 -