Customizing Your Machine; General Description; Setting The Fax Parameters - Panasonic DP-1810F Operating Instructions Manual

Customizing Your Machine

General Description

Your machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter Table,
are preset for you and do not need to be changed. If you do want to make a change, read the table carefully.
Some parameters, such as the Resolution and Contrast parameters, can be temporarily changed by simple
key operation just before a transmission is made. When the transmission ends, however, these parameters
return to their preset values (Home position). Other parameters can only be changed by the procedure
described below.

Setting the Fax Parameters

Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
4
5
6
NOTE
28
Enter Fax Parameter number from the Parameter Table.
(See page 29 to 31)
Ex: for STAMP
0 0 4
Ex: for ON
2
To set another parameter, press
Step 3 or press
STOP
1. To scroll the Fax Parameters in Step 2, press
2. To print out a Fax Parameter List, see page 135.
to return to
CLEAR
to return to standby.
to select the "FAX/EMAIL MODE".
SET MODE
ENTER NO. OR
FAX PARAMETER(1-99)
NO.=
FAX PARAMETER(1-99)
NO.=004
04 STAMP(HOME)
1:OFF
04 STAMP(HOME)
2:ON
05 MEMORY(HOME)
2:ON
or .
(1-4)
∨ ∧