Setting Your Id Number (Fax Telephone Number) - Panasonic DP-1810F Operating Instructions Manual

Setting Your ID Number (Fax Telephone Number)

If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving,
your ID Number will appear on the remote machine's display and their ID Number will appear on your
display.
We suggest you use your facsimile telephone number as your ID number. (Max. 20 digits)
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
.
3
repeatedly until display shows;
4
Enter your ID (max. 20 digits) by using the keypad and
MONITOR
Ex:
2 0 1
1 2 1 2
If you make a mistake, use
one space beyond the incorrect number, press
then re-enter the new number.
5
NOTE
1. You may use
following digit(s) for your country code.
Ex :+1 201 555 1212
2. Your Fax Telephone Number must be set as your ID Number because it is required by the
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of these
Operating Instructions)
key to enter a space between numbers.
MONITOR 5 5 5
or
to enter a "+" character at the beginning of the ID number to indicate the
+1 for U.S.A. country code.
+81 3 111 2345 +81 for Japan country code.
User Parameters
to select the "FAX/EMAIL MODE".
MONITOR
to move the cursor
CLEAR
SET MODE (1-4)
∨ ∧
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
ID NO.
ID NO.
201 555 1212
21