Changing Or Erasing The Department Code - Panasonic DP-1810F Operating Instructions Manual

Changing or Erasing the Department Code

If you have to change or erase any of the Department Codes, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
If you set the Access Code to restrict the Fax Parameters
settings, the unit prompts you to Input the Access Code.
Input the Access Code and press
4
5
6
Enter the Department Code number you wish to change
or erase.
Ex: (01 to 50)
1 2
7
then enter a new NAME. (See Note 1)
Ex:
P A N A F A X
or just go to step 10 to erase the Department Code.
8
9
Then enter a new Department Code.
Ex:
5 6 7 8
.
SET
MONITOR S A L E S
Department Code
to select the "FAX/EMAIL MODE".
SET MODE (1-4)
∨ ∧
ENTER NO. OR
ENTER ACCESS CODE
FAX PARAMETER(1-99)
NO.=
77 DEPARTMENT CODE
2:VALID
DEPT. CODE (01-50)
∨ ∧
ENTER NO. OR
INPUT DEPT. NAME
12 PANASONIC SALES
INPUT DEPT. NAME
12
INPUT DEPT. NAME
12 PANAFAX SALES
INPUT DEPT. CODE
INPUT DEPT. CODE
INPUT DEPT. CODE
1234
5678
97