User Parameters
General Description
Your machine has several basic settings (User Parameters) to help you keep records of the documents you
send or receive. For example, the built-in clock keeps the current date and time, and your LOGO and ID
Number help to identify you when you send or receive documents.
These parameters can be programmed via your PC by using the Configuration Editor included with the
Panasonic Document Management System software CD-ROM (included with the machine).
Follow the Operating Instructions included with the Panasonic Document Management System application.
Setting the Date and Time
At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
4
5
NOTE
18
.
Enter the new date and time.
Ex:
Month
0 3
Date
1 5
Year
2 0 0 2
Time
1 5 0 0
If you make a mistake, use
over the incorrect number, then overwrite it with a correct
one.
1. The current Date & Time must be set because it is required by the Telephone Consumer Act of
1991. (For details, see FCC NOTICE at the end of these Operating Instructions)
: March
: 15th
: 2002
: 3:00 PM
or
to move the cursor
to select the "FAX/EMAIL MODE".
SET MODE
∨ ∧
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
DATE & TIME
1-01-2001 00:00
DATE & TIME
3-15-2002 15:00
(1-4)